Norsat 1021XRTFH 2W Ku-Band Non-Inverted BUC

by enteshari | June 24, 2019

Norsat Block Up-Converters offer state-of-art performance and reliability in a small, lightweight, package for demanding VSAT applications, such as:

- Small, lightweight package for low-cost, direct-to-feed mounting
- Low in-Band noise emissions for up to 100 times improved system capacity
- Power efficient for remote site applications
- Single cable L-Band Interface with 10MHz reference and 14.5-24 VDC power supply for simple installation
- Next generation single RF board design and advanced MMICs for greater reliability
- 30 dBm (1010XRT) and 33 dBm (1020XRT) minimum output power under all operating conditions for reliable uplink performance
- Temperature compensated gain control for constant performance over dynamic conditions
- Integrated lock detector shuts off transmitter in the event of cable cut or IDU failure for safe, compliant operation
- Manufactured span in Japan
CE and ETSI EN 301 428 (2000-05) compliance for global applications

Output frequency	14.00 to 14.50 GHz
Input frequency	950 to 1450 MHz
Output P1dB minimum	33.0 dBm
L.O. frequency	13.05 GHz
Input VSWR maximum	2.0 : 1
Output VSWR maximum	2.1 : 1
Phase noise (SSB) maximum	-70 dBc/Hz at 1 kHz -80 dBc/Hz at 10 kHz -90 dBc/Hz at 100 kHz
External reference signal frequency	10 MHz
Power requirements	+14.5 to +24V supplied through center conductor of IF cable

Power consumption maximum	26 W
Dimensions	176 (L) x 124 (W) x 52 (H) mm (6.9 x 4.9 x 2.0 in)
Weight	1.8 kg / 4.0 lb
External reference level	-5 to + 5 dBm
10 MHz external reference phase noise maximum	-125 dBc/Hz at 100 Hz -135 dBc/Hz at 1 kHz -140 dBc/Hz at 10 kHz
Gain (including variation over temperature and frequency)	50 dB min 60 dB max
Gain stability over temperature	±2.25 dB at any constant frequency
Gain stability in-band at any constant temperature	±1.0 dB in any 54 MHz band ±2.25 dB over full 500 MHz band