NJS8486S Specifications | |
---|---|
Input Frequency | 3.400 to 4.200 GHz (Palapa C-Band) |
LO Frequency | 5.15 GHz |
IF Connector | 950 to 1750 MHz |
Local Stability | +/-3 ppm |
IF Connector | Type F female (75 ohm) |
Input Interface | Waveguide, CPR229 (with Groove) |
Output Interface | F-Type Female |
Noise Temperature (Ta.:+25C) | 15 K typ., 30 K max. |
Linear Gain (Ta.:+25C) | 59 dB min., 66 dB max. |
L.O. Phase Noise | -70 dBc/Hz typ. @ 100 Hz -80 dBc/Hz typ. @ 1 kHz -85 dBc/Hz typ. @ 10 kHz -95 dBc/Hz typ. @ 100 kHz |
Spurious | a) -140 dBm max. at input, Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). b) -55 dBc max. with test CW signal -10 dBm IF output (Measured at specified IF band). |
Input V.S.W.R. | 3.0:1 typ. |
Output V.S.W.R. | 2.5:1 max. |
Power Requirement | +24 VDC (+12 to +24 VDC) |
Current Drain | 350 mA max. |
Temperature Range (ambient) | -40 to +60 C (operating) -40 to +8- C (storage) |
Dimension & Housing (L x W x H) (without Interface Connectors) |
80.8 mm x 99.6 mm x 76 mm (3.18" x 3.92" x 2.99") |
Weight | 800 g (1.76 lbs) |