LED constant voltage waterproof switching power supply
Features:
- Low price and high reliability
- AC input power suitable for the world
- High efficiency and low operation temperature
- Soft-start current can reduce the AC input impact effectively
- With Short-circuit and overload protection
- 100% full-load burning test
- Small bulk design
- Installed with EMI filter, minimum wave.
- 2 years warranty
Model | HS-200-48 | |
output | DC voltage | 48V |
Voltage tolerance | ±1% | |
Rated current | 4.2A | |
Current range | 0~4.2A | |
Rated power | 201.6W | |
Ripple&noise | 240mvp-p | |
input | Voltage range | 180~264VAC, 255~373VDC |
Frequency | 47~63HZ | |
AC current | 2.5A/230VAC | |
Efficiency | 84% | |
Inrush current | Cold start current 40A/230VAC | |
Leakage current | <3.5mA/240VAC | |
protection | Over load | Rated output power 105%~150%start over load protection |
protection type: hiccup mode, auto-recovery after fault condition is removed | ||
Over voltage | 54.8~56.6V | |
protection type: hiccup mode, auto-recovery after fault condition is removed | ||
Over temperature | Shell temp>50°C, start over temperature protection | |
protection mode: cutoff output, auto-recovery after temperature become normal | ||
environment | Working temp, humidity | -10°C~+60, 20%~90%RH |
Storage temp.humidity | -20°C~+85, 10%~95%RH non condensing | |
Withstand vibration | 10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes | |
safety | Withstand voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
Isolated resistance | I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC | |
fit standard | Safety standard | Fit UL1012, IP67 protect level |
eMC standard | Fit EN55022, CLASS A | |
others | Dimension | 119×110×50mm |
Weight/packing | 0.85kgs | |
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. |