MDM2210 Satellite Modem

by leahvsatpluscom  |  July 6, 2022

MDM2210 Satellite Modem

KEY FEATURES

  • Small size, table top or wall mounted 
  • DVB-S2 ACM Forward
  • 4CPM MF-TDMA Adaptive Return Link
  • Embedded TCP acceleration and encryption
  • Multi-level Quality of Service
  • Versatile IP routing and addressing
  • Low jitter for real time applications
  • DNS Cache/Relay and HTTP pre-fetching
  • Support of IPv4 and IPv6
  • MicroSD card and USB interface (future use)
  • Over-the-air software upgradeability
  • Over-the-air monitoring and diagnostics tools

Trump cards are its easy installation and efficient modulation techniques enabling network operators to offer IP broadband services in a cost effective way.

Main advantages
  • Low initial investment per user, thanks to a very low terminal cost and unique Point & Play easy - installation capability
  • Easy to use web GUI for installation, diagnostics and troubleshooting
  • Adaptive Return Link based on different 4CPM modulations/coding and multiple channel bandwidths.
  • High service satisfaction ensured through true broadband experience
  • Optimal availability and efficiency of DVB-S2 transmission thanks to Newtec’s technologies FlexACM® and ThiMM
  • Efficiency improvement of 10 to 15% with Newtec’s Clean Channel Technology®
•   Max RX rate UDP             up to 20 Mbps total (unicast or multicast)
•   Max TX rate TCP               up to 3.5 Mbps
•   Max TX rate UDP              up to 3.5 Mbps
Modem Interfaces
RF INPUT/OUTPUT:
•   Connector:                     Two F
•   Impedance:                  75 Ohm
•   RF in Frequency:                950 – 2100MHz (L-band)
•   Rx Level:                        -65 to -25dBm
•   RF out Frequency:             2750 – 3000MHz
•   Tx Level:                           0 dBm
LOCAL AREA CONNECTION     1 x 10/100 TX (RJ-45)
USB                                       USB 2.0 (future use)
MASS STORAGE                      MicroSD card (future use)
Mechanical & Environment
•  Housing                      170x150x32mm
•   Weight                          450 g
•  Operating temperature  0 to 40°C
•   Humidity                       5% - 95% non-condensing
Power supply
•   DC Power supply             18V or 24V (depending on iLNB)
•  Mains adaptor input      mains AC, 50Hz\210-260V and 60Hz\100-130V
•   Power consumption         <30 Watt (0.8W Ku iLNB), <60 Watt (2W iLNB)
IP features
•  Protocols:       UDP, IPv4 & IPv6, ICMP, IGMPv2, TCP, ARP, DHCP, DNS, DiffServ Marking
Management Interfaces
•  Web GUI
•  Over-the-air software & configuration updates
• Over-the-air monitoring, self-test and diagnostics
Software release
• Specifications valid for Sat3Play© software release 2.2
Standards
•  EN 302307     DVB-S2
•  EN 301428   Ku-band VSAT spectrum usage
•  EN 301459   Ka-band VSAT spectrum usage
•  IEEE 802.3    10T Ethernet
•  IEEE 802.3u  100TX Ethernet
Satellite Link Interface
FORWARD CARRIER (RX)
Standard                   DVB-S2 ACM
Modulation                  QPSK, 8PSK, 16APSK, 32APSK
•   Coding                  1/4, 1/3, 2/5, 1/2,3/5, 2/3,3/4,4/5, 5/6, 8/9, 9/10 
•   Roll-off                     5, 10, 15, 20, 25 and 35 %
Symbol rate             3.6 - 63 Mbaud (up to 47Mbaud for 16APSK, up to 38Mbaud for 32APSK with 5/6)
RETURN CARRIER (TX)
Modulation             4CPM (Quaternary Continuous Phase Modulation) with 6 different modcods, with Adaptive Return Link
Access Scheme         Multi Frequency TDMA (Timed Division Multiple Access)
Channel bandwidth 128kHz to 4MHz

Please do let us know your requirement so I could send you the proposal to showcase your needs.

To know more about the product and special offer, please contact us at shop@vsatplus.com

For more details, please visit our website: https://www.vsatplus.com/

Copyright © 2023 VSATPlus
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram