Ayecka SR1 Advanced DVB-S2 Receiver GigE interface

by enteshari  |  October 11, 2020

SR1 - DVB-S2 Demodulator

Ayecka SR1 is advanced DVB-S2 Demodulator with 240Mbps over a GigE inter face, an IP-over-satellite receiver that gives service providers a strong competitive edge. SR1’s best cost-performance parameters lead the market. With its support of advanced modulation modes at 16 and 32 APSK, SR1 delivers more performance at lower cost and signifi¬cantly reduces long-term operating costs.

SR1’s best cost-performance parameters currently lead the market. With its support of advanced modulation modes at 16 and 32 APSK, ACM, VCM, and Pre-distortion Feedback Channel. SR1 delivers more throughput over the available bandwidth. EUMETCAST, NOAAPORT, MVDDS, IP/SAT and VIDEO/IP/SAT approved, SR1 significantly reduces long-term operating costs.

Satellite service providers can leverage Ayecka SR1 demodulators across multiple applications, including bandwidth augmentation for VSAT networks, satellite unidirectional networks, data-casting, IPTV, and digital TV head-ends.

The use of DVB-S2 technology significantly improves the performance of IP over satellite networks. Ayecka's SR1 leverages DVB-S2’s advanced features by increasing both the channel capacity and the efficiency of existing transponders to deliver higher bit rate.

Product Highlights

  • Cost-effective solution for IP over DVB-S2 reception
  • Full support of DVB-S2
  • VCM and ACM
  • MODCOD: QPSK ¼ to 32 APSK 9/10
  • 1Msps to 45Msps (SR1), 100ksps to 67.5Msps (SR1-Pro) / over 240Mbps reception and processing capabilities
  • Support MPE and GSE (SR1 Pro)
  • Dual carrier receiver
  • Hardware Accelerator
  • L2 transparent device
  • Jumbo Frame Support

Main Applications

  • SCPC IP connectivity over satellite
  • MCPC Satellite receivers
  • Data Casting – Eumetcast and Nooaport
  • MVDDS – Terrestrial Ku links

DVB-S2 Demodulator

ModulationQPSK, 8PSK,16APSK, 32APSK
Channel Rateup to 240 Mbps
Roll-off Factors0.05, 0.2, 0.25, 0.35
CodingLDPC and BCH decoder as for DVB-S2 requirements
Code rates½, 3/5, 2/3, ¾, 4/5, 5/6, 8/9,9/10
FramingDVB-S2 framing
ModesCCM, VCM, ACM
Input Freq950-2150MHz
Symbol Rates100Ksps to 67.5 Msps
LNB Power14/18V, 22Khz, DiSEqC 2.0
EncapsulationMPE and GSE
ManagementWeb GUI & CLI
MaintenanceField Upgradable
FeatureSR1ProSR1
De-GSE Filters (Number of simultaneous GSE streams the demodulator can support)   8  2
Maximum Symbol rate [Msps] 67.5 45
Minimum Symbol rate [Msps] 0.101  1
Real time Signal quality indications over UDP   V  X
BBF over UDP according to ESA L.3 protocol   V  X
Jumbo Frames  10K  X
Support of L2 and VLAN   V  X
Recommanded for new designs   V  X


Order information 

SR1 MPE - AY020
SR1 GSE - AY021
SR1 Pro - AY030 (GSE & MPE )

Ayecka SR1 Advanced DVB-S2 Receiver GigE interface

Copyright © 2023 VSATPlus
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram